Map Pin LocationChattanooga, TN
Show Filters

Power Tools & Accessories

Chattanooga, TN
1352 Results
Irwin
Irwin Wire Gauge Drill Bit #13
$4.47 Each
Size : #13
Material : Bright High Speed Steel
Length : 3-1/2 In.
Shank Diameter : Straight
Drilling Depth : 2-5/16 In.
Tip Angle : 118 Degree
Irwin
Irwin Wood Countersink Replacement Bit
$10.74 Card
Countersink : #8 - 11/64 In.
Shank Type : 1/4 In. Hex
For Use With : Wood
Irwin
Irwin Speedbor MAX Speed Auger Bit 7/8 In.
$9.74 Each
Bit Size : 7/8 In.
Length : 6 In.
Shank Diameter : 1/4 In. Hex Quick Change
Flute Length : 2-5/8 In.
Milwaukee Accessory
Milwaukee M/2 SDS-Plus Rotary Hammer Bit
$7.99 Each
Diameter : 3/8 In.
Length : 6 In.
Flute Length : 4 In.
Cutter Geometry : 2-Cutter
Material : Carbide
Black & Decker/DWLT
DeWalt 14-Piece Black Oxide Drill Bit Set 1/16 In. Thru 3/8 In.
$19.69 Each
Pieces In Set : 14 Pcs.
Material : Black Oxide
Size : 1/16 In. thru 3/8 In.
Package Quantity : 14
Freud Inc
Diablo SPEEDemon Spade Bit 3/4 In. X 4 In.
$2.98 Each
Size : 3/4 In. x 4 In.
Material : Clean Wood
Shank Diameter : Hex
Artu USA Inc
ARTU General Purpose Drill Bit 3/8 In.
$12.93 Each
Size : 3/8 In.
Material : Cobalt
Length : 5-1/4 In.
Shank Diameter : 3/8 In.
Drilling Depth : 3-1/16 In.
Tip Angle : 118 Degree
Freud Inc
Diablo Auger Bit 1-1/2 In.
$23.87 Each
Bit Size : 1-1/2 In.
Length : 7-1/2 In.
Shank Diameter : 7/16 In. Hex Quick Change
Flute Length : 4 In.
Irwin
Irwin Unibit Step Drill Bit
$62.68 Each
Minimum Size : 7/8 In.
Maximum Size : 1-1/8 In.
Step Range : 1/4 In.
Number of Holes : 2 Steps
Shank Diameter : 7/16 In. Hex
Material : High Speed Steel
Irwin
Irwin Black Oxide Metal Countersink
$11.43 Each
Countersink : 1/2 In.
Shank Type : 1/4 In. Round
For Use With : Most Machineable Metals
Black & Decker/DWLT
DeWalt Rapid Load Rotary Masonry Drill Bit
$6.96 Each
Diameter : 1/4 In.
Length : 7 In.
Flute Length : 4 In.
Shank Diameter : 1/4 In. Hex Rapid Load
Material : Carbide
Black & Decker/DWLT
DeWalt Percussion Masonry Drill Bit
$9.94 Each
Diameter : 1/4 In.
Length : 12 In.
Flute Length : 7 In.
Shank Diameter : 1/4 In.
Material : Piloted Carbide
Irwin
Irwin WeldTec Ship Auger Bit 1/2 In.
$27.85 Each
Bit Size : 1/2 In.
Length : 17 In.
Shank Diameter : 3/8 In. Hex Quick Change
Flute Length : 12 In.
Milwaukee Accessory
Milwaukee Carbide Masonry Drill Bit
$15.97 Each
Diameter : 1/2 In.
Length : 12 In.
Flute Length : 10 In.
Shank Diameter : 1/2 In. 3-Flat
Material : Carbide
Freud Inc
Diablo SPEEDemon Spade Bit 1 In. X 16 In.
$10.74 Each
Size : 1 In. x 16 In.
Material : Clean Wood
Shank Diameter : Hex
Freud Inc
Diablo Auger Bit 1/2 In.
$25.86 Each
Bit Size : 1/2 In.
Length : 17-1/2 In.
Shank Diameter : 7/16 In. Hex Quick Change
Flute Length : 13-1/2 In.
Black & Decker/DWLT
DeWalt SDS-Plus Rotary Hammer Bit
$9.94 Each
Diameter : 1/2 In.
Length : 6 In.
Flute Length : 4 In.
Cutter Geometry : 2-Cutter
Material : Carbide
Irwin
Irwin 5-Piece Metal Countersink Bit Set
$59.69 Each
Pieces in Set : 5 Pc.
Milwaukee Accessory
Milwaukee Thunderbolt Titanium Drill Bit 9/32 In.
$5.46 Each
Size : 9/32 In.
Material : Titanium
Length : 4-1/4 In.
Shank Diameter : 9/32 In. 3-Flat
Drilling Depth : 2-15/16 In.
Tip Angle : 135 Degree
Freud Inc
Diablo SDS-Plus Carbide-Tipped Rotary Hammer Drill Bit
$5.96 Each
Diameter : 5/16 In.
Length : 6 In.
Flute Length : 4 In.
Cutter Geometry : SDS Plus
Material : Concrete
Irwin
Irwin Titanium Drill Bit 5/32 In.
$3.97 Card
Size : 5/32 In.
Material : Titanium
Length : 3-1/8 In.
Shank Diameter : 5/32 In.
Drilling Depth : 2 In.
Tip Angle : 135 Degree
Black & Decker/DWLT
DeWalt Percussion Masonry Drill Bit
$4.97 Each
Diameter : 3/16 In.
Length : 3 In.
Flute Length : 2 In.
Shank Diameter : 3/16 In.
Material : Piloted Carbide
Irwin
Irwin Silver & Deming Drill Bit 17/32 In.
$17.90 Each
Size : 17/32 In.
Material : Black Oxide HSS
Length : 6 In.
Shank Diameter : 1/2 In.
Drilling Depth : 3 In.
Tip Angle : 118 Degree
Freud Inc
Diablo SDS-Plus Carbide-Tipped Rotary Hammer Drill Bit w/Stop Collar
$21.88 Each
Diameter : 1/2 In.
Length : 4-1/4 In.
Flute Length : 1-11/16 In.
Cutter Geometry : SDS Plus
Material : Concrete