Power Tools & Accessories

Size : 3/8"

Bit Size : 3/32" - 1/2"
Sharpening Angle : 118 deg
Stone Material : Diamond

Angle : 45 to 90 deg
Drill Size : 3/8", 1/2"

Body Material : Glass-Filled Nylon
Drill Guides : (2) 3/8 In. Dia. Standard
Clamp Type : Face Clamp
For Use With : 1/2 In. to 1-1/2 In. Thick Materials
Screw Centers : 1/2 In. to 1-1/2 In.

Body Material : Glass-Filled Nylon
Drill Guides : (3) 3/8" Dia Standard
Clamp Type : Toggle Clamp, Face Clamp
For Use With : 1/2 In. to 1-1/2 In. Thick Materials
Screw Centers : 1/2 In. to 1-1/2 In.

Capacity : 1/16" to 3/8"
Thread Diameter : 3/8"
Threads Per Inch : 24 tpi

Chuck Size : 3/8", 1/2"
Cutting Capacity : Up to 20 ga

Drill Size : 1/16" - 1/2"
Size Increments : 1/64"
Dimensions : 2-3/8" x 6-1/2"

Fits Deckboard : 5-1/4" to 5-3/4"
Automatic Spacing : 3/16"
Dimensions : 2.4" W x 8" H x 9.5" L
Weight : 2.1 lb

Fits Deckboard : 5-1/4" to 5-3/4"
Automatic Spacing : 1/16"
Dimensions : 2.4" W x 8" H x 9.5" L
Weight : 2.1 lb

Body Material : Glass-Filled Nylon
Drill Guides : (3) 3/8 In.
Clamp Type : Toggle Clamp
For Use With : 1/2 In. to 1-1/2 In. Thick Materials
Screw Centers : 1/2 In. to 1-1/2 In.

Angle : 90 Deg
Chuck Size : 1/4 In. Hex

For Use With : TS1 Turboshear

Wrench Included : Yes

Chuck Size : 1/4 In.
Pilot Size : 13/64 In.
Handle Type : T-Handle

Chuck Size : 3/8 In., 1/2 In.
Pilot Size : 15/64 In., 1/4 In., 17/64 In.
Handle Type : 4-Sided

Body Material : Glass-Filled Nylon
Drill Guides : Standard

Bit Size : 3/32" - 3/4"
Sharpening Angle : 118 or 135 deg

Body Material : Glass-Filled Nylon
Drill Guides : (2) 1/2" Dia Heavy-Duty
Clamp Type : Face Clamps
For Use With : 1-1/2 In. and up Thick Materials
Screw Centers : #14 x 2-1/2 In.

Body Material : Glass-Filled Nylon

Chuck Size : 3/8 In., 1/2 In.
Pilot Size : 9/32 In.
Handle Type : T-Handle

Chuck Size : 1/4 In. Hex
Angle : 90 Deg.

Chuck Size : 1/2 In., 5/8 In.
Pilot Size : 5/16 In.
Handle Type : Thumb-Handle

For Use With : 350X, DD500X & DD750X