Map Pin LocationChattanooga, TN
Senco SCN49XP Siding Nailer
Senco
  • Senco SCN49XP Siding Nailer

    $384.99 Each
    Out-of-Stock

    Loading Purchase Count

    Details

    Coil siding nailer is well-balanced and powerful. All day durability and dependability are designed in. Powered fastening solution for the installation of siding, including fiber cement products from Hardi and Certainteed. Drives smooth, ring, and screw shank coil nails in both wire and plastic sheet collation. Nail finish: bright basic, galvanized and stainless. Features a contact or sequential actuation selectable trigger, clear magazine door, and adjustable depth of drive control.

    Specs
    Id 22746
    SKU 302301
    PartNo 5J0001N
    Magazine Angle 15 Degree
    Fastener Range 1-1/2 In. to 2-1/2 In.
    Fastener Capacity 250 to 375 Nails
    Collation Wire/Plastic
    Fastener Diameter 0.082 In. - 0.113 In.
    Firing Mode Contact or Sequential
    Operating Pressure 70-120 psi
    Air Inlet 3/8 In. NPT
    Weight 5.1 Lb.
    Dimensions 5-3/16 In. W x 12 In. H x 12-1/4 In. L
    Warranty 5 Year
    CID 1
    Compliance & Restrictions

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Similar Items
    Metabo HPT
    Metabo HPT Siding Nailer
    $369.99 Each
    Magazine Angle : 16 Degree
    Fastener Range : 1-1/2 In. to 2-1/2 In.
    Fastener Capacity : 200 to 300 Nails
    Collation : Wire/Plastic
    Fastener Diameter : 0.090 In. - 0.099 In.
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 3/8 In. NPT
    Weight : 4.9 Lb.
    Dimensions : 5-3/64" W x 11-3/16" H x 11-27/64" L
    Warranty : 5 Year
    Senco
    Senco FramePro 325FRHXP 20 Degree Framing Nailer
    $269.99 Each
    Magazine Angle : 20 Degree
    Collation : Plastic
    Fastener Type : Full Round Head
    Fastener Range : 2 In. to 3-1/4 In.
    Fastener Capacity : 64 Nails
    Magazine Load : Rear
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 3/8 In. NPT
    Weight : 7.9 Lb.
    Dimensions : 4-1/2 In. W x 12 In. H x 17-5/16 In. L
    Warranty : 5 Year
    Makita
    Makita 15 Degree Siding Nailer
    $429.00 Each
    Magazine Angle : 15 Degree
    Fastener Range : 1-1/2 In. to 2-1/2 In.
    Fastener Capacity : 300 Nails
    Collation : Wire
    Fastener Diameter : 0.090 In. - 0.099 In.
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 5.1 Lb.
    Dimensions : 5 In. W x 12-1/2 In. H x 10-3/4 In. L
    Warranty : 3 Year
    Metabo HPT
    Metabo HPT Brad Nailer
    $99.99 Each
    Gauge : 18 Ga.
    Fastener Range : 5/8 In. to 2 In.
    Fastener Capacity : 100 Nails
    Firing Mode : Contact or Sequential
    Magazine Load : Side Load
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 2.2 Lb.
    Dimensions : 9-1/4 In. H x 10 In. L
    Warranty : 5 Year
    Southern Carlson
    Paslode Pneumatic Coil Siding Nailer
    $399.00 Each
    Magazine Angle : 0 Degree
    Minimum Fastener Size : 1-1/2 In.
    Maximum Fastener Size : 2-1/4 In.
    Fastener Capacity : 300 Nails
    Collation : Plastic
    Fastener Diameter : 0.80 In. - 0.105 In.
    Firing Mode : Contact or Sequential
    Operating Pressure : 80-120 psi
    Width (In.) : 5.75
    Height (In.) : 12.5
    Length (In.) : 12.625
    Weight (Lb.) : 4.5
    Warranty : 1 Year Full; 5 Year Extended Limited
    Corded/Cordless : Corded
    Power Type : Pneumatic
    Metabo HPT
    Metabo HPT 3-1/4 In. 30 Degree Framing Nailer
    $349.99 Each
    Magazine Angle : 30 Degree
    Collation : Paper Tape
    Fastener Type : Clipped Head or Offset Rouond
    Fastener Range : 2 In. to 3-1/4 In.
    Fastener Capacity : 86 to 94 Nails
    Magazine Load : Rear
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 9 Lb.
    Dimensions : 4-1/4 In. W x 14-3/16 In. H x 18 In. L
    Warranty : 5 Year