Map Pin LocationChattanooga, TN
Metabo HPT 3-1/4 In. 30 Degree Framing Nailer
Metabo HPT
  • Metabo HPT 3-1/4 In. 30 Degree Framing Nailer

    $349.99 Each

    Loading Purchase Count

    Details

    Clipped head framer offers a selective trigger for non-bump fire nailing. Lightweight and well balanced for easy maneuverability, this 3-1/4" nailer fires through a day of framing without wearing out your wrists. A versatile driving port is designed to hose a wide range of nails for optimal versatility. Tool-less depth of drive adjustment for flush fastening. Cylinder valve drive system for rapid response and increased durability. Two-piece steel magazine withstands job site abuse. An innovative, open-nose design means easy extraction of the truly rare jammed nail. The nailer's hardened claw tip reduces wear and limits slippage when driving at a slanted angle. A selective actuation trigger (ANSI compliant), located on the trigger, allows transition from single actuation to contact actuation for optimal versatility. A soft rubber-grip offers more comfort and better control. Best of all, with a fire rate of 3 nails per second, you are sure to get that framing job done fast. Includes rafter hook.

    Specs
    Id 6682
    SKU 318914
    PartNo NR83AA5M
    UPC 00717709023901
    Country of Origin Taiwan
    Magazine Angle 30 Degree
    Collation Paper Tape
    Fastener Type Clipped Head or Offset Rouond
    Fastener Range 2 In. to 3-1/4 In.
    Fastener Capacity 86 to 94 Nails
    Magazine Load Rear
    Firing Mode Contact or Sequential
    Operating Pressure 70-120 psi
    Air Inlet 1/4 In. NPT
    Weight 9 Lb.
    Dimensions 4-1/4 In. W x 14-3/16 In. H x 18 In. L
    Warranty 5 Year
    CID 1
    Compliance & Restrictions

    Warning: Cancer and Reproductive Harm

    Similar Items
    Metabo HPT
    Metabo HPT 3-1/4 In. 21 Degree Framing Nailer
    $349.99 Each
    Magazine Angle : 21 Degree
    Collation : Plastic
    Fastener Type : Full Round Head
    Fastener Range : 2 In. to 3-1/4 In.
    Fastener Capacity : 64 Nails
    Magazine Load : Top
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 8.8 Lb.
    Dimensions : 4-1/4 In. W x13-3/8 In. Hx21-13/16 In. L
    Warranty : 5 Year
    Senco
    Senco FramePro 325XP 34 Degree Framing Nailer
    $244.99 Each
    Magazine Angle : 34 Degree
    Collation : Paper Tape
    Fastener Type : Clipped Head
    Fastener Range : 2 In. to 3-1/4 In.
    Fastener Capacity : 83 Nails
    Magazine Load : Rear
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 3/8 In. NPT
    Weight : 7.9 Lb.
    Dimensions : 4-1/2 In. W x 12 In. H x 17-5/16 In. L
    Warranty : 5 Year
    Metabo HPT
    Metabo HPT 15-Gauge Finish Nailer
    $179.99 Each
    Gauge : 15 Ga.
    Magazine Angle : 34 Degree
    Fastener Range : 1-1/4 In. to 2-1/2 In.
    Fastener Capacity : 100 Nails
    Firing Mode : Contact or Sequential
    Magazine Load : Rear Load
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 4.4 Lb.
    Dimensions : 3-1/4 In. W x 13-9/16 In. L x 12 In. H
    Warranty : 5 Year
    Stanley Bostitch
    Bostitch 15 Degree High-Power Framing Nailer
    $369.99 Each
    Magazine Angle : 15 Degree
    Collation : Wire Weld
    Fastener Range : 2 In. to 3-1/2 In.
    Fastener Capacity : 225 to 300 Nails
    Magazine Load : Bottom
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 8.1 Lb.
    Dimensions : 14 In. H x 12-1/4 In. L
    Warranty : 7 Year
    Makita
    Makita 21 Degree Framing Nailer
    $279.00 Each
    Magazine Angle : 21 Degree
    Collation : Plastic
    Fastener Type : Full Round Head
    Fastener Range : 2 In. to 3-1/2 In.
    Fastener Capacity : 73 Nails
    Magazine Load : Rear
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 1/4 In. NPT
    Weight : 8.3 Lb.
    Dimensions : 4-5/8 In. W x 13-3/4 In. H x 22 In. L
    Warranty : 3 Year
    Senco
    Senco FramePro 325FRHXP 20 Degree Framing Nailer
    $269.99 Each
    Magazine Angle : 20 Degree
    Collation : Plastic
    Fastener Type : Full Round Head
    Fastener Range : 2 In. to 3-1/4 In.
    Fastener Capacity : 64 Nails
    Magazine Load : Rear
    Firing Mode : Contact or Sequential
    Operating Pressure : 70-120 psi
    Air Inlet : 3/8 In. NPT
    Weight : 7.9 Lb.
    Dimensions : 4-1/2 In. W x 12 In. H x 17-5/16 In. L
    Warranty : 5 Year