This push-to-connect fitting with brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. Green indicator ring will display in the slots around the fitting to visually display that permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
|Country of Origin||USA|
|Fitting Size 1||3/4 In.|
|Fitting Size 2||3/4 In.|
|Connection Type 1||Push|
|Connection Type 2||FPT|
|Type||Female Push Connector|
|Pressure Rating (psi)||80 / 160|
|Maximum Working Temperature (F)||200 / 73.4|
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.