Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings are then released using a disconnect tool and slide back onto the other end of the pipe for a successful connection and leak repair. Disconnected Clip is included with the fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 psi It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
|Country of Origin||Australia|
|Fitting Size 1||1/2 In.|
|Fitting Size 2||1/2 In.|
|Connection Type 1||Push|
|Connection Type 2||Push|
|Pressure Rating (psi)||200|
|Maximum Working Temperature (F)||200|
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.